K4KPN BBS & RMS Gateway are Available

June 9, 2018

KYPN would like to announce the full availability of the KYPN Dry Ridge BPQ32 based packet radio site as of June 9, 2018.

The following packet radio applications are available:

K4KPN-1    BBS
K4KPN-4    Node
K4KPN-13  Chat/Conference Server
K4KPN-14  RMS Gateway

The above packet radio applications are normally available 24x7x365 to appropriately licensed amateur radio operators on the following frequencies/modes:

SYSTEM PORTS:
441.0500 MHz 9600 baud *
145.6900 MHz 1200 baud
223.6600 MHz 1200 baud *
28.1480 MHz USB dial, 28.1495 CF, Robust Packet “NET10R” *
50.6200 MHz 1200 baud **
* High availability, primary port.
** Dual-use port, both general use & 6m APRS WIDE1-1 Digi

All 5 bands and 3 modes are published to the Winlink channel listing.

Recommended user software:

KYPN recommends Outpost Packet Message Manager version 3.0.0.333 for BBS access. Full installer is available for download here.

KYPN recommends Winlink Express v1.5.12.0 or newer for RMS access. Available for download from here.

More details can be found on the K4KPN-1 packet BBS under messages #1 thru 8.

More details in future blog posts and the work in progress draft KYPN System FAQ.

 

The KYPN team.


Stay Tuned

April 22, 2018

Well after two weekends worth of discussion and debate, some Kentucky Packet Systems will be returning to the airwaves soon. Not everything is returning and a lot of what is returning will only remain if it sees enough usage to justify it. This week’s projects have been tower climbs to re-feed the VHF/UHF antennas on my personal tower and tweaking the microwave links between the sites that will be used.

Our utility company recently replaced a pole next to the Williamstown building where I still maintain a minimal office/storage site. When they scheduled that I pressured for new hardware (vs just swapping it to a new pole) and better grounding. This has helped some with the nasty 6m/2m noise floor at that location. As such I’m going to see if it will be useful to have a low profile APRS I-gate there. With the loss of the KB9GYO digi last Fall, Edgewood’s limited coverage down this way, and the reduction in coverage from the Lexington digi, the area’s local 2m digi coverage is very poor now. I’m not certain how much a low profile I-gate/Wide1-1 digi in Williamstown will help, but we shall see what T&E reveals this week.

Do note that this I-Gate site will not be permanent, it will eventually be turned off.  I’m leasing that site and seriously doubt I’ll still have any need for it in a few years. The proper fix for the APRS network is a much better I-gate location and a local medium profile digipeater. Sorry but I can’t provide either and others are going to have to step up and provide better 2m APRS infrastructure. Sorry, it is what it is.

Yes the local APRS scene is in near shambles. My inbox since last summer makes it clear that I’m not the only one that has noticed. My initial monitoring of the 2m APRS network from a medium profile location quickly revealed many problems.  A lot of stuff with poor signals, misconfigured software, and of course the usual congestion from abuse/silliness on the channel from adjacent areas. My my what a mess the 144.3900 APRS frequency is anymore. I can’t imagine why I prefer the HF APRS network over the 2m APRS network for my needs LOL.

Some have asked about K4KPN-10’s future? Well I just signed a 3 year contract on two very nice fiber runs into that site and invested in a new HF radio for it last Fall. Safe to say KYPN remains committed to keeping that on the air. Plans to eventually move it to Wyoming? No plans to move it out there since it is not wise to place another HF gate there that close to Bill’s excellent gate in Montana. With VE7OI’s new gate coming online and the excellent observed performance of K4KPN-10 out that way by myself and Randy (K7LNR) it seems clear that the N. American 30m RP APRS network is best served by K4KPN-10’s current location.

With the solid internet (both fiber and dialup) at that site now, it’s proving relatively easy to properly monitor, control. and keep secure from afar which has been one of my top control op concerns. When you run stuff under the automated & remote control rules you have an obligation to monitor and keep control over anything putting RF into the air. Obviously there are no guarantees – it’s a hobby, we provide it for free – but currently KYPN has no plans to change K4KPN-10 for the foreseeable future.

Not sure how much of the local packet gear will be back online before we head back west in a few weeks. Dad’s health and my day job project list will have at least myself coming back to 4-land fairly often this summer. Plenty of opportunities to finish whatever is not completed this time around.

Last but not least, no I’m not back to stay. We will be very “bi-coastal” for a few more years for work/play and helping care for an elderly parent. That said our retirement is coming sooner or later. I like southern Idaho just as much (same quality of life and a heck of a lot cheaper) but the XYL fell in love with NW Wyoming. She recently switched the car registration, moved her business, and made herself an official Wyomingite. You can guess how our WY vs ID homestead planning conversations go….Wyoming it is LOL.

I will do another post soon detailing what is coming back permanently, some background, what is coming back conditionally, and what will be turned off in a few years.

Stay tuned!

Jeff
WA4ZKO